MaxiiNet Vi3103 User Manual

Vi3103 L2 Drop and Insert 30W PoE+ 3-Port Switch User's Manual
The Vi3103 is a 3-port Layer 2 Ethernet and PoE switch providing drop and
insert capability for connecting several IP devices along a single cable run.
The Vi3103 provides a cost effective method for increasing distances
beyond the standard Ethernet limit of 328 feet (100m). Multiple units can be
cascaded to provide up to nine IP cameras to be connected to a single
network switch port over distances of up 3,000 feet
For small systems the Vi3103's Layer 2 network capability can eliminate the
need for network switchs saving costs and rack space. It also can
significantly decrease network switch costs by increasing the port capacity
of the switch. As a mini network switch, the Vi3103 avoids the potentials for
transmission collisions by complying with IEEE standards. It is an easy and
quick solution to add an extra camera without requiring to have a new
home-run cable.
The Vi3103 can be powered by PoE or a local power source. Additional
power up to 30W can be added at any point along the cable run where
power outlets are available and provide the ability to power IP cameras up
to 30W.
Important Safety Warning
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Install in accordance with the manufacturer's instructions.
- This installation should be made by a qualified service person and should
conform to all local codes.
- DO NOT bundle UTP or Coax signals in the same conduit as high-voltage
wiring.
- To reduce the risk of fire or electrical shock, do not expose these products
to rain, moisture, dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on Vigitron
equipment.
- DO NOT install the unit in a place where the operating ambient tempera
ture exceeds 75° C.
- Make sure that the external power supply output voltage is in the recom
mended range.
- Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus that produce heat.
- Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long
periods of time.
- Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as a power
supply cord or plug is damaged, liquid has been spilled, or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
- The power plug and the PoE input cable are used as the disconnect
device and shall remain readily
RISK OF ELECTRIC SHOCK
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING! - To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. This apparatus shall not be exposed to
dripping or splashing and no objects filled with liquids, such as vases shall
be placed on the apparatus.
WARNING! - This apparatus is a Class I product. This product must
be connected to a mains socket outlet through an AC to DC Power supply.
WARNING! - The mains plug is used as the disconnect device and
shall remain readily operable.
(909m).
CAUTION
DO NOT OPEN
The Smart Choice for Transmission Solutions
Application Drawings
Providing PoE to 2 Cameras using a Local Power Supply
Network Switch
Data
328 ft. (100m)
Power
Supply
Vi3103 allows for the transmission of two cameras over a single cable run or adding a new
camera close to an existing camera.
Providing PoE to 2 Cameras using input PoE
PoE Switch
Data + 60W PoE
328 ft. (100m)
Vi3103 allows for the transmission of two cameras over a single cable run or adding a new
camera close to an existing camera. The PoE Midspan provides power to the Vi3103 and
both cameras.
Drop and Insert Application
NVR
9xVi3103 for total of 3,280 ft. (1,000m)
Vi3103
Data + 30W PoE
Data
328 ft. (100m)
328 ft. (100m)
Power
Supply
Data + 30W PoE
328 ft. (100m)
PoE
Camera
A total of 9 IP addresses can be accessed on a single cable run eliminating the need for
network switches.
Installation (Powered by PoE)
a) Port-1 (PoE-In) Connection:
- Connect Port 1 of Vi3103 to the PoE switch or a high power PoE source
using a standard Cat5/6 cable of maximum 100m in length. This port can
receive up to 30W PoE and data 10/100Mbps.
b) Port-2 & 3 (PoE-Out) Connection:
Ports 2 and 3 can be used to either connect an IP camera or to port 1 of
another Vi3103. Use a standard Cat5/6 cable of maximum 100m in length to
connect the IP camera. Ports 2 and 3 can each provide up to 30W of PoE
power when powered by an external power supply. When no power supply
is used, the Vi3103 can deliver up to 30W shared between ports 2 and 3.
Installation (Powered by Local Power Supply)
a) Power Connection:
- Connect power connector to Vi1120 120W desktop power supply for using
full PoE capacity of Vi3103.
b) Port-1 (PoE-In) Connection:
- Connect Port-1 of Vi3103 to the network switch using a standard Cat5/6
cable of maximum 100m in length.
c) Ports-2 & 3 (PoE-Out) Connection:
- Connect Port 2 & 3 of a Vi3103 to IP cameras or similar devices using
standard Cat5/6 cables of maximum 100m in length. These ports can also
be connected to Port 1 of another Vi3103. The maximum PoE power
available at each port is 30W.
MaxiiNet
PoE Switches
Vi3103
Data + 30W PoE
328 ft. (100m)
PoE
Camera
Data + 30W PoE
328 ft. (100m)
PoE
Camera
Vi3103
Data + 30W PoE
328 ft. (100m)
PoE
Data + 30W PoE Camera
328 ft. (100m)
PoE
Camera
Vi3103
Vi3103
Data + 30W PoE
328 ft. (100m)
Power
Supply
Data +
Data + 30W PoE
328 ft. (100m)
328 ft. (100m)
PoE
PoE
Camera
Camera
www.vigitron.com
™
Cat 5/6
PoE Camera
30W PoE
Vi3103_UM