This product must be installed by a licensed electrician.
1
Specifications
Cat. no.
lumen package
Efficacy
CCT
Supply Voltage
Input Power
Colour Rendering Index (CRI)
Beam Angle
Lifespan
Dimmable
Protection Class
IP Rating
Warranty
2
Installation
Isolate 240V mains supply before opening fitting for maintenance or installation
1. Remove the cover and diffuser from the fitting by loosening the mounting screws.
2. Use the fitting as a template to mark the screw positions onto the wall / ceiling.
3. Remove the terminal block cover and connect the mains wiring to the terminal block as marked on the fitting. Ensure that the wires are secure and no bare
wires are exposed
4. Install the terminal block cover back onto the terminal block.
5. Install the fitting onto the wall / ceiling.
6. Install the diffuser and cover back onto the fitting and tighten the mounting screws.
HPM Legrand in all cases. 9. HPM Legrand reserves the right to modify the specification of this product at any time. 10. This product has been designed to operate in ambient temperatures -5°C to 25°C, occasionally reaching 35°C.