Sylvania SSD800 Service Manual page 35

[11] Deck Pedestal
(S-10)
(S-11)
[12] Side
Bracket
HOW TO MANUAL EJECT
1. Remove the Top Case.
2. Make a tool from a paper clip, etc., (length = approxi-
mately 50 mm, maximum diameter = approximately 3
mm) as shown below.
3. Insert the tool into the manual eject hole on the DVD
Mecha. Then, push it until the tray is ejected.
Top Cover
DVD Mecha
Tray
(S-10)
Fig. D9
Eject Hole
Deck Assembly
1-7-5
Paper clip (Available Locally)
Straightened
portion = approximately 35mm
Length = approximately 50mm
H9200DC