Sylvania SSD800 Service Manual page 28

example: setting clock or timer program). Press to
add or delete channel numbers during channel preset.
19. STOP/EJECT Button (VCR)
●EJECT Button
Press to remove the tape from the VCR.
●
STOP Button
Press to stop the tape motion. Press to enter digits
when setting program (For example:setting clock
or timer program).
modes from the on screen menu.
20. OUTPUT Button
Press to select DVD mode or VCR mode.
●
You can switch the output mode either by pressing
the OUTPUT Button on the front panel, or by
pressing the DVD or the VCR Button on the
remote control. However, if you press the OUT-
PUT Button on the front panel first, you need to
re-select the corresponding mode by pressing
the DVD or the VCR button on the remote con-
trol.
21. FWD/SKIP Button (DVD) [page 25]
Plays back from the beginning of the next chapter or
track. Hold down to fast forward playback.
22. PLAY Button (DVD)
Press to begin playback.
23. SKIP/REV Button (DVD)
Plays back from the beginning of the current chapter
or track. Hold down to fast reverse playback.
24. STOP Button (DVD)
Stops operation of the disc.
25. OPEN/CLOSE Button
Press to insert discs into or remove them from the tray.
26. Display, Remote Sensor Window
27. SPEED Button
Press to select the VCR's recording speed (SP or SLP)
28. POWER Button
Press to turn the power on and off.
29. Number Buttons
●
DVD mode
Press to directly select a Track (Audio CD) for
playback.
Press to program Tracks (Audio CD) for playback.
●
VCR mode
Press to select TV channels on the DVD/VCR.
To select channels, enter channel numbers as a
two-digit number for the quickest results. For
example, to select channel 6, press 0 then 6.
+100 button:
If you want to select channels 100 and above, press
this button first, then press the last two digits. For
example, to select channel 125, press +100 button
first, then press 2 and 5.
30. DISPLAY Button
●
DVD mode
Press to access or remove the display screen during
DVD or Audio CD playback.
●
VCR mode
Press to access or remove the VCR's on-screen sta-
tus display.
31. DVD Button
Press to select DVD mode for the remote control.
●
You can switch the OUTPUT mode either by
pressing the OUTPUT Button on the front panel, or
by pressing the DVD or the VCR Button on the
remote control. However, if you press the OUTPUT
Press to select the setting
Button on the front panel first, you need to re-
select the corresponding mode by pressing the
DVD or the VCR button on the remote control.
32. h Button
●
DVD mode
Press to view the DVD picture in fast reverse
motion or to reverse playback of an Audio CD.
●
VCR mode
Press to rewind the tape, or to view the picture
rapidly in reverse during the playback mode
(Rewind Search). Press to cancel a setting of
timer program. Press to correct digits when setting
program (For example: setting clock or timer pro-
gram). Press to add or delete channel numbers
during channel preset.
33. Stop Button
Press to stop the tape motion. Press to enter digits
when setting program (For example: setting clock or
timer program). Press to select the setting modes
from the on screen menu.
34. RECORD Button
Press once to start a recording. Or, press repeatedly
to start a One-Touch Recording.
35. MENU Button
●
DVD mode
Press to display the menu of the Disc.
●
VCR mode
Press to access the VCR menu.
36. TITLE Button
37. SETUP Button
Press to enter the setup mode or to change setup items.
38. ZOOM Button
Enlarges part of a DVD-reproduced image.
39. MODE Button
Activates program playback or random playback
mode when playing CDs or MP3. Sets Black level or
SRS TruSurround.
40. SUBTITLE Button
Press to select the desired subtitle language.
41. ANGLE Button
Press to change the camera angle to see the sequence
being played back from a different angle.
42. REPEAT Button
Repeats playback of the current disc, title, chapter or
track.
43. A-B REPEAT Button
Repeats playback of a selected section.
44. SEARCH MODE Button
●
DVD mode
Press to access or remove the Search display,
which allows you to go directly to a specific
Title/Chapter/Track/Time.
●
VCR mode
Press to perform a Time Search or an Index Search.
45. CLEAR/C.RESET Button
●
DVD mode
Press to reset the setting.
●
VCR mode
Press to reset the counter. Press to exit from the
MENU screen.
46. RETURN Button
Returns to the previous operation.
47. Arrow Buttons
Use when making settings while watching the
display on a TV screen.
1-6-2 H9200IB