Advertisement
TROUBLESHOOTING
Problem
The beverage cooler
does not cool.
The beverage cooler
is not cold enough.
The beverage cooler
seems to make too
much noise.
An interior red light is
flashing.
9
Possible Causes
The unit may be
plugged in using a
different voltage.
The circuit breaker may
be tripped or there is a
blown fuse.
The external
environment may
require a higher setting.
The cooler may be
placed too close to a
heat source.
There is insufficient
ventilation.
The door is not
completely closed or
the door seal is not
working properly.
The unit is not leveled.
There is insufficient
ventilation. The unit is
too close to a wall or
another surface.
The set temperature is
too low.
newair.com
Solution
Check if using the wrong
voltage.
Reset the circuit breaker
or check for a broken
fuse.
Lower the temperature
of the cooler.
Keep the cooler away
from direct sunlight or
other heat sources.
Place the beverage
cooler in an area with
proper ventilation and
clearances.
Close the door tightly.
Do not open the door
frequently and do not
keep the door open for
extended periods of
time. Replace the seal
on the door if necessary.
Adjust the unit's feet
and ensure the product
is level.
Allow sufficient
clearance around the
unit.
Adjust the set
temperature so that it is
higher than the
beverage cooler's
interior temperature.
Advertisement
