Related Manuals for NewAir NBC126SS02
Summary of Contents for NewAir NBC126SS02
- Page 1 SKU: NBC126SS02 126 Can Beverage Cooler OWNER’S MANUAL Manual v1.2 Read and save these instructions.
-
Page 2: Table Of Contents
Safety Information & Warnings ................4 Parts List ....................... 5 Assembly & Installation ..................6 Operating Instructions ..................7 Cleaning & Maintenance ..................8 Troubleshooting ....................9 Limited Manufacturer’s Warranty ..............11 SPECIFICATIONS NBC126SS02 ODEL 110V OLTAGE 1.3A URRENT 60Hz REQUENCY... -
Page 3: Register Your Product Online
REGISTER YOUR PRODUCT ONLINE Register Your NewAir Product Online Today! Take advantage of all the benefits product registration has to offer: Service and Support Diagnose troubleshooting and service issues faster and more accurately Recall Notifications Stay up to date for safety, system updates and recall notifications... -
Page 4: Safety Information & Warnings
• Failure to clean the condenser every six months can cause the unit to malfunction. • Allow unit temperature to stabilize for 24 hours before use. • Do not block any internal fans. • Keep the beverage cooler away from hazardous materials or combustible/flammable substances. newair.com... -
Page 5: Parts List
• Use only genuine supplier’s replacement parts. Imitation parts can damage the unit, affect its operation or performance, and may void the warranty. PARTS LIST When you receive your unit, carefully remove the exterior and interior packaging. It is recommended that you retain the packaging for future use. Check to make sure the following parts are included: •... -
Page 6: Assembly & Installation
Extreme cold or hot ambient temperatures may also prevent proper performance. Once the cooler is plugged in, let the beverage cooler run for at least 30 minutes. Do not change the temperature or adjust any settings at this time. REVERSING THE DOOR SWING newair.com... -
Page 7: Operating Instructions
1. To reverse the door swing of the unit, remove the plastic hinge cover at top of the unit. 2. Unscrew the door hinge. 3. Flip door upside-down. 4. Attach door to opposite side of unit with screws. 5. Replace plastic door hinge cover. OPERATING INSTRUCTIONS TEMPERATURE ADJUSTMENT 1. -
Page 8: Cleaning & Maintenance
If you notice an excess amount of frost buildup inside the unit, follow these steps to remove it: Unplug the beverage cooler. Allow frost to melt from the inside of the cooler. If necessary, use a plastic utensil to scrape ice from the interior surface. Dry thoroughly before plugging it in again. newair.com... -
Page 9: Troubleshooting
MOVING YOUR COOLER To move your cooler: • Remove anything stored inside. • Securely tape down all loose parts located inside the unit. • Turn the leveling feet up to the base in order to avoid damage. • Tape the door shut. •... - Page 10 Turn off the beverage cooler, unplug it, and There is excess humidity Frost is building up in remove the frost buildup or the interior the unit. manually. Reconnect the temperature is too low. power once the ice has thawed. newair.com...
-
Page 11: Limited Manufacturer's Warranty
LIMITED MANUFACTURER’S WARRANTY This appliance is covered by a limited manufacturer’s warranty. For one year from the original date of purchase, the manufacturer will repair or replace any parts of this appliance that prove to be defective in materials and workmanship, provided the appliance has been used under normal operating conditions as intended by the manufacturer. - Page 12 When making a warranty claim, please have the original bill of purchase with purchase date available. Once confirmed that your appliance is eligible for warranty service, all repairs will be performed by a NewAir™ authorized repair facility. The purchaser will be responsible for any removal or transportation costs.