LG CM4545 Owner's Manual page 26

26 Operating
Install "LG Bluetooth Remote" App
through "Google Android Market
(Google Play Store)"
1. Tap the "Google Android Market (Google Play
Store)" icon.
2. In the search bar, type in the "LG Bluetooth
Remote" and search it.
3. In the search result list, find and tap
"LG Bluetooth Remote" to start downloading
Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
,
Note
3
y Make sure that your Bluetooth device is
connected to the Internet.
y Make sure that your Bluetooth device is
equipped with "Google Android Market
(Google Play Store)".
y If you want to get more information, refer
to explanation of BT app in "Google Android
Market (Google Play Store)".
CM4540-FB_DRUSLLK_ENG_6554.indd 26
Activate Bluetooth with
"LG Bluetooth Remote" App
"LG Bluetooth Remote" app helps to connect your
bluetooth device to this unit.
1. Tap "LG Bluetooth Remote" app icon on the
home screen to open "LG Bluetooth Remote"
app, and go to the main menu.
2. Tap [Setting] and select the unit you want.
3. If you want to get more information to operate,
tap [Setting] and [Help].
,
Note
y BT app will be available in the software
version as follow;
- Android O/S : Ver 2.3.3 (or later)
y This unit does not support the multi-pairing.
If this unit is already connected with other
Bluetooth device, disconnect that device
and then try again
y If you use "LG Bluetooth Remote" app for
operation, there would be some differences
between "LG Bluetooth Remote" app and the
supplied remote control. Use the supplied
remote control as necessary.
y Depending on the Bluetooth device, "LG
Bluetooth Remote" app may not work.
y The connection you've made may be
disconnected if you select other application
or change the setting of the connected
device via "LG Bluetooth Remote" app. In
such a case, please check the connection
status.
y To prevent a malfunction, you are
recommended to connect only one device
to this unit.
y After connection of BT app, music may be
output from your device. In this case, try
connecting procedure again.
2014-02-25 4:17:01