Operating; Viewing A Tv Channel - LG DT924A Owner's Manual

Hide thumbs Also See for DT924A:
Table of Contents

Advertisement

14

Operating

Viewing a TV Channel

Auto Tuning
Automatically finds all channels available through
the 'Antenna In' source and stores all the active
channels found.
Select "Auto Tuning" option then press ENTER (b)
to start auto tuning.
1. Select [TV] mode using MODE button.
2. Press SETUP to display [TV SETUP] menu.
3. Select [CH. SYSTEM], and press d.
4. Select a TV System (PAL B/G,PAL/I, PAL D/K or
SECAM B/G, SECAM D/K)
5. Select [AUTO SCAN], and press d.
6. When [START] is highlighted, press ENTER (b)
to start auto tuning.
4
Manual Tuning
You can edit a channel using [Manual Tuning]
option in the [TV SETUP] menu.
1. Select [TV] mode using MODE button.
2. Press SETUP to display [TV SETUP] menu.
3. Select [CHANNELS], and press d.
4. When [START] is highlighted, press ENTER (b)
to display [Manual Tuning] menu.
5. Use w/s to select a menu and use a/d to
select a value of the item to be set.
y [CH. No]: Selects a channel number.
y [Fine]: Selects a frequency to obtain a clear
picture.
y [Band]: Selects a channel band. (VHF H, VHF L
or UHF)
y [Skip]: Sets the channel to the skipped
channel. The channel cannot be selected
using the CH +/- button during TV viewing.
y [Manual]: Searches for a channel
automatically. Searching stops when the unit
tunes in a channel.
Channel Selection
You can select channels as described below.
If the TV channel is not set, use [AUTO SCAN] option
in [TV SETUP] menu.
y Use CH +/- to select a channel through the
channels in memory.
y Use number (0-9) buttons to select a channel
directly.
y Press RETURN (x) to return to the previous
channel you viewed.
,
Note
Notes on the TV receiving signal
If the TV receiving signal is poor, it may appear
following symptoms.
y Screen is shaked.
y Faded in double or triple.
y Field gets bad gradually.
y Color appears or disappears.
y Screen is spotted.
y Stripes appear.
y Sound of noise is occurred.
It may not receive TV receiving signals as
following.
y Between Buildings
y At an airplane or a train passing nearby
y A power cable nearby
y In the mountain or forest
y A automobile, A motorcycle
y A high tension wire

Advertisement

Table of Contents
loading

Table of Contents