Installing The Drain Hose - LG WK518K4XC Owner's Manual

Installing the Drain Hose

• The drain hose should not be placed higher
than 100 cm above the floor. Water in the
appliance may not drain or may drain slowly.
1
Insert the band clamp onto the drain hose
elbow.
2
With the hose leading up from the elbow,
insert the elbow onto the drain outlet on the
back of Mini Washer.
3
Adjust the band clamp with pliers to keep
the hose securely in place and prevent
leaking.
18
Using the Drain Hose Connector
1
2
3
Band clamp
• Adjust the band clamps to prevent the hoses
from coming loose or leaking. Failure to do so
could result in flooding. Use of the drain
connector helps avoid siphoning, odors, or
improper draining.
• Make sure the drain hose is not kinked or
pinched. This is a potential cause of drainage
problems or noise.
NOTE
• Depending on the installation environment,
you may have to purchase a separate drain
hose connector.
Band clamp
Connect the drain hose of Main Washer
and Mini Washer to the drain connector.
Insert the included band clamps on to the
ends of the two drain hoses.
Push the drain hoses firmly onto the drain
connector.
CAUTION
EN
Drain hose
connector