Table of Contents
Advertisement
en Installation and connection
To align the appliance, turn the ap-
2.
pliance feet. Check that the appli-
ance is level using a spirit level.
All appliance feet must stand firmly
on the ground.
Screw the lock nuts tightly against
3.
the housing using a WAF 17
wrench.
In doing so, hold the foot tight and
do not adjust its height.
4.7 Connecting the appliance
to the electricity supply
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
16
The connection details of the appli-
ance can be found under Tech-
nical data → Page 63.
Check the mains plug is inserted
2.
properly.
Advertisement
Table of Contents
