Aligning The Appliance - Bosch WGA254A0IN User Manual And Installation Instructions

Table of Contents

Advertisement

Connect the water inlet hose to a
2.
tap (26.4 mm = 3/4").
Open the water tap carefully and
3.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
against unintentional loosening.
Note: Observe the draining heights.
The maximum draining height is
100 cm.
Drainage into a
siphon
¾˝
min.
10 mm
min.
17 mm
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Installation and connection en
Drainage into a
washbasin
Drainage into a
plastic pipe with
rubber sleeve or
into a gully.
4.6 Aligning the appliance
In order to reduce noise and vibra-
tion and to prevent the appliance
from moving, align the appliance cor-
rectly.
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Loosen the lock nuts using a WAF
1.
17 wrench by turning it in a clock-
wise direction.
Fix and secure
the water outlet
using an elbow.
→ Page 31
Fix and secure
the water outlet
using an elbow.
→ Page 31
15

Advertisement

Table of Contents
loading

Table of Contents