Body wall thickness: 16 mm
Screw the mounting pieces to the body on the left
1.
and right.
¨
Remove the tabs from the bottom of the mounting
2.
pieces.
©
Body wall thickness: 19 mm
Fold out the tabs on both of the mounting pieces.
1.
Screw the mounting pieces to the body on the left
2.
and right.
©
Remove the tabs from the bottom of the mounting
3.
pieces.
ª
Preparing the appliance
A handle strip must be screwed to the filter pull-out. This
handle strip can be one that is provided with the
appliance, or one that is available as an accessory.
Use the screws provided to secure the handle strip
1.
to the filter pull-out.
Connect the power cord provided to the
2.
appliance.
¨
Use the strain relief to secure the power cord in
3.
place.
©
¨
General information en
15