Cleaning; Safety Test - ebm-papst R2D220-AA24-09 Operating Instructions Manual

R2D220-AA24-09
If you have any other problems, contact ebm-papst.

5.1 Cleaning

NOTE
Damage to the device during cleaning.
Malfunction possible
→ Do not clean the device using a water jet or high-pressure
washer.
→ Do not use any cleaners containing acids,
bases or solvents.
→ Do not use any pointed or sharp-edged objects to clean.

5.2 Safety test

What has to How to test?
be tested?
Check the Visual inspection At least every
protective
casing against
accidental
contact for
damage and to
ensure that it is
intact
Check the Visual inspection At least every
device for
damage to
blades and
housing
Mounting the Visual inspection At least every
connection lines
Mounting of Visual inspection At least every
protective
earth connection
Check the Visual inspection At least every
insulation of
the wires for
damage
Impeller for Visual inspection At least every
wear/deposits/
corrosion and
damage
Check the ball Manual check
bearings to by turning the
ensure they rotor in shut-off
are quiet, can state
move easily
and are free of
play
Item no. 10624-5-9970 · Revision 68158 · Release 2009-09-14 · Page 9 / 9
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com
Operating instructions
Frequency Which
measure?
Repair or
6 months replacement of
the device
Replacement
6 months of the device
Fasten
6 months
Fasten
6 months
Replace wires
6 months
Clean or
6 months replace impeller
At least every Replace
6 months device in case
of noise,
difficulty of
movement or
clearance of
the bearings