Fujitsu Siemens Computers L17-8 Getting Started page 4

OSD-Description
Colour:
This menu lets you select a preset color temperature (sRGB,6500K,
∨ ∧
9300K, Native) by pressing the OSD buttons or , changes to
the color temperature take immediate effect on screen.
If you wish to set individual color values, select the Custom
Colour option, then press the MENU button to select the red,
green and blue settings and set the desired value using the OSD
∨ ∧
buttons or .The current settings are automatically saved
when you return to the previous level or exit the OSD menu.
OSD Setup:
Language: selects the language for the OSD menu by pressing
∨ ∧
the OSD buttons or .
OSD H- Position: Controls the OSD menu's horizontal position.
OSD V- Position: Controls the OSD menu's vertical position.
OSD Timeout: Determines how long (in seconds) the OSD
menu waits before closing automatically after no action has
been performed.
Advanced:
Input select: (only monitors with analog and digital input)
Selects input signal (Analogue, Digital) by
∨ ∧
pressing the OSD buttons or , press MENU or AUTO to
confirm the selection.
Resolution Notifier: There is an optional OSD window
(On/Off) that displays the newly adjusted screen
resolution settings including both horizontal and vertical
frequencies.
Factory recall:
MENU: Start AUTO: Back
Information: The optimum resolution for this monitor is
1280 × 1024 @ 60KHz
Note: Do not adjust the screen settings when animation is displayed and make sure to adjust the
settings in full screen mode.
Edition 2