LG S3WF Owner's Manual page 31

Table of Contents

Advertisement

Programme
Note
Programme
Setting
Note
NOTE
• Check Fabric Care Guide in this manual and fabric care labels on garment before styling.
• Wrinkles may remain in some items. Wrinkles caused by extended storage may be difficult to reduce.
Wrinkles in cotton or linen may not be reduced completely. Iron after styling, if desired.
• Some odours can be difficult to remove. Odours from oily substances may be difficult for the steam to
penetrate. Odours from extended storage may also be difficult to remove.
• Programme times may vary depending on the usage environment, including water temperature.
• Very thick clothing may not be dried uniformly at the end of the programme.
• Styling times for the programme may be longer for wet clothes that are not spin dried.
Wrinkle Care
The appliance utilizes high temperature steam and moving hangers to reduce wrinkles without damaging
the garment.
Wrinkle Care Performance Comparison Styler
The appliance uses steam to indirectly ironing, wrinkled clothing may not be fully stretched. At this time,
there may be a difference in wrinkle care performance with depending on the weight and material of the
cloth.
Sanitary
• Do not use this programme for wool or knitwear, because the high
temperatures and steam can cause shrinkage.
• Natural fibers must be marked washable/hand-washable and tumble dry,
to avoid shrinkage.
• Do not use with items containing rubber, foam, or adhesive.
Gentle Dry
Normal: Dry clothes using warm air and moving hanger without tumbling. It
is suitable for refreshing non-washable fabrics and natural fibers like 100%
wool, cashmere.
Rain/Snow: Use this setting to dry damp clothes.
Dehumidify: Use this setting to dehumidify the room where the appliance is
installed. Use while door is open 45º. If door is closed, the setting does not
operate.
• The wrinkles care performance depends on the weight and fabric of the
clothes.
OPERATION
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

S3 f seriesS3mfc

Table of Contents