Operation Operation Overview; Preparing Loads - LG S3WF Owner's Manual

Table of Contents

Advertisement

OPERATION
18
OPERATION
Operation Overview
Using the Appliance
1
Prepare items.
• Wash clothes first, if needed.
• No heat-sensitive items or items that can be
damaged by exposure to water.
• Place items on hangers or the shelf.
• Fasten buttons and close zippers to keep
items on moving hangers and prevent
damage.
2
Clean the lint filter and change the sheet in
the aroma filter.
• Lift out filter and remove lint from last load
for faster and more efficient performance.
Reinstall filter, checking alignment when
closing grill. Do not operate the appliance
without the lint filter in place. If using a fabric
softener sheet in the aroma filter, change it
after every use.
3
Check the water tanks.
• Fill water supply tank if needed. Empty water
drain tank if needed. Use clean tap water in
the supply tank for better product
performance and lifespan. Do not use
distilled water or reuse water from the drain
tank.
4
Load the appliance.
• Pay attention to fabric care labels and
programme choice. If clothing is not
appropriate for the programme selected, it
may shrink or be seriously damaged.
• Remove all empty hangers to avoid noise,
friction, and damage to clothing.
5
Turn on the appliance.
• Touch Power button to turn on the
appliance.
6
Choose a desired programme.
• Touch a programme selector button. You
can toggle to one of the settings each time
you pressed the button.
7
Begin a programme.
• Touch and hold Start/Pause button to begin
a programme. Pause programme at any
time by touching Start/Pause button again.
If the Start/Pause button is not pressed
within a certain time, the appliance will shut
off and all settings will be lost.
• Do not open door during programme. If
steam or hot air escapes from open door,
condensation may collect on floor or walls,
resulting in damage or mold.
CAUTION
• Do not open the door during operation. There is
a risk of burns or injury from escaping hot air or
steam.
• Do not allow steam or hot air to escape the
cabinet during operation. Opening the door
during operation also affects performance,
lengthens styling time, and results in water
condensing and collecting on the floor.
8
End of programme.
• Remove items when programme finishes.
Leave door open to let hot air escape.
Interior light shuts off after 1.5 minutes if
door is left open.

Preparing Loads

Checking the Fabric Care Labels
Most articles of clothing feature fabric care labels
that include instructions for proper care. Below are
some of the symbols that are relevant to choosing
appropriate items for the appliance.

Advertisement

Table of Contents
loading

This manual is also suitable for:

S3 f seriesS3mfc

Table of Contents