Table of Contents
Advertisement
OPERATING INSTRUCTIONS
Controlling the temperature
Refrigerator temperature:
Press SET key to select temperature from level 1 to
level 5 (coldest). The refrigerator will run under the
setting temperature after 15 seconds automatically.
When the refrigerator is powered on, all temperature
level LED will light on for 3 seconds, and then the
current setting temperature level displays.
NOTE: Where there is no failure, the LED light
displays current setting temperature level. On the
occurrence of a failure, the corresponding LED light
will give a combined display of failure code (see
failure code section below).
Freezer temperature:
The temperature of the freezer can be controlled manually
by adjusting the knob of freezing ventilation door (page 4
item 3). Turn to Normal position for normal use or turn the
knob clockwise for colder temperature.
Failure code
The following table is a list of the fault indicators and corresponding alarms.
Status of corresponding indicators
/Temperature control LED
Level
Refrigerator compartment temperature sensor failure
Freezer compartment temperature sensor failure
Ambient temperature sensor failure
8
1
Level
2
Level
3
Level 4 Level 5
Temperature level setting key
Failure
Advertisement
Table of Contents
