Table of Contents
Advertisement
Select the monitor number of the installed mimo.
Calibration
The product is with factory default calibration value. If required user may execute Touch
Screen Controller Calibration as follow.
Calibration is very important procedure to align coordinates of the exact touch point on
screen with mouse pointer. With the calibration user may utilize Touch Screen Control without
distortion.
The last calibration data will be saved in the Windows system so as not to be required after
reboot the system except the user rotate the screen.
1.1 Click 「Start」 → 「Programs」 → 「UPDD」 → 「Setting」
1.2. Click UPDD Consol (Pointer Device Setting) icon on system tray → 「Calibration」
1 4
|
Advertisement
Table of Contents
