Adjusting The Monitor Settings; Using The On-Screen Display Menu - HP ZR22W User Manual

Adjusting the Monitor Settings

The monitor settings can be adjusted from the On-Screen Display (OSD) menu or from the HP Display
Assistant utility.
NOTE: If there is a problem with the display settings, try resetting the settings to the factory defaults
by opening the OSD and selecting Factory Reset from the OSD menu.

Using the On-Screen Display Menu

Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To
access the OSD, do the following:
1. If the monitor is not already on, press the
2. To access the OSD Menu, press the
3. To navigate through the OSD Menu, press the
up, or the
4. To select an item from the OSD Menu, use the
then press the
5. Adjust the item using the
6. After adjusting the function, select Save and Return, or Cancel if you don't want to save the setting,
then select Exit from the Main Menu.
NOTE: If the buttons remain untouched for 30 seconds (factory default) while displaying a menu, the
firmware will save the current adjustments and exit. Also, if the video controller changes video mode
while the OSD is active, the current (adjusted) settings will not be saved, the OSD will be turned off, and
the new mode will be displayed.
20 Chapter 4 Operating the Monitor
– (Minus) button to scroll down.
OK button to select that function.
+ or – buttons on the front panel to adjust the scale.
Power button to turn on the monitor.
Menu button on the monitor's front panel.
+ (Plus) button on the monitor's front panel to scroll
+ or – buttons to scroll to and highlight your selection,
ENWW