Samsung HW-J6090R User Manual page 10

DESCRIPTIONS
+ Controlling the Soundbar using your tV Remote Control
1. Press and hold the
2. "on - TV remoTe" appears on the Soundbar's display.
3. In the TV's menu, set the TV speaker to external speaker.
● not available if the TV arC function or HDMI mode is in use.
● all buttons are not available except the VOL +/- and the
● TV menus differ by manufacturer and model. refer to the TV's user manual for further information.
● manufacturers supporting this function:
- VIZIo, LG, Sony, Sharp, PHILIPS, PanaSonIC, ToSHIBa, GrUnDIG, Hisense, rCa
- This function may not be compatible with your TV's remote depending on the remote control's
manufacturer.
● To turn off this function, press the
"off - TV remoTe" appears on the Soundbar's display.
inStaLLing tHe BatteRy in tHe ReMOte COntROL
1. Use a suitable coin to turn the
remote control's battery cover
counterclockwise to remove it
as shown in the figure above.
SOUND button for more than 5 seconds while the Soundbar is turned on.
SOUND button for 5 seconds.
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when inserting
the battery. Put the battery cover on and
align the '●' marks side by side as
shown in the figure above.
(mute) buttons in this function.
10
3. Use a suitable coin to
turn the remote control
battery cover clockwise
as far as it will go to fix it
in place.