Table of Contents
Advertisement
Troubleshooting
Problem
Fan speed is
not changing
according
to the
Comprehensive
Air-quality.
Filter
replacement
indicator not
turning off
Strange
indication is
displayed
Air out only
from the rear
side
22
§ Set the fan speed to Auto. When the fan speed is set to
High, Medium, Low, or Sleep, the fan speed will not change
automatically.
§ After replacing the 2-in-1 filter, press the [
over 3 seconds to reset the filter replacement alert.
§ If you see C103 , 154 , 163 , contact the service center.
§ The design is intended for purifying the air efficiently
with the wind rising through whirling. As the wind flows
in the clockwise direction, you may feel that the front
side is weaker while the rear side is stronger for the wind
flown out from the upper air outlet.
Solution
] for
Advertisement
Table of Contents
