Lan Settings - Canon GX6040 Online Manual

LAN settings

Important
• The administrator password is required to change the settings if it is enabled to change the settings on
the operation panel using the administrator password.
Wi-Fi
Wireless Direct
Wired LAN
To print the network settings, select Print details and select Yes.
Printing Network Settings
Important
• The network settings printout contains important information about your network. Handle it with care.
Wi-Fi
• Wi-Fi setting list
The network settings information of the printer appears when it is connected by Wi-Fi. (Some setting
items are not displayed depending on the printer settings.)
Items
Connection
Network name (SSID)
Frequency
Wi-Fi security
Signal strength (%)
IPv4 address
IPv4 subnet mask
IPv4 default gateway
IPv6 link-local address
MAC address (Wi-Fi)
Printer name
Bonjour service name
("XX" represents alphanumeric characters.)
Enabled (connected)/Enabled (disconnected)/Disable
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX (up to 32 characters)
2.4 GHz/5 GHz
Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)
XXX
XXX. XXX. XXX. XXX (12 characters)
XXX. XXX. XXX. XXX (12 characters)
XXX. XXX. XXX. XXX (12 characters)
XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
XXX. XXX. XXX. XXX (12 characters)
XXXXXXXXXXXXXXX (up to 15 characters)
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
188
Setting