Side marker lamp
1.To remove the lamp, pry the lamp
with a flat-tip screwdriver and push
it rearward.
2.Disconnect the wiring connector,
and remove the bulb by turning the
bulb socket counterclockwise.
3.To install the bulb, reverse the
removal procedure.
CAUTION
•
When prying with a flat-tip
screwdriver, wrap it with pro-
tective tape to prevent dam-
age.
•
Put on gloves to protect your
hands.
OEU074073
Rear combination light bulbs
replacement
BUS, VAN
1. Tail/stop light
2. Tail/stop light
3. Turn signal light
4. Back up light
5. Rear fog light
OEU074046
7
7-75