Hyundai H350 2016 Owner's Manual page 351

What to do in an emergency
- Front : Position the jack under lon-
gitudinal member in rear of
front sub frame assembly.
- Rear : Position the jack under rear
axle, as near the wheel
being jacked as possible.
WARNING
Jack location
To reduce the possibility of
injury, be sure to use only the
jack provided with the vehicle
and in the correct jack position;
never use any other part of the
vehicle for jack support.
6-16
Jack handle
Holder
8.Fit the jack handle into the jack
socket and then move the jack
handle up and down.
OEU064039
9.Raising the vehicle
If the jack-up point is too high, extend
the jack by turning the jack head
counterclockwise. Using the spanner
wrench or jack handle, turn the
release valve clockwise fully.
Move the jack handle up and down to
raise the ram until just before the
jack contacts the jacking point of the
vehicle.
Position the jack with the jack han-
dle. Position it only at the specified
points indicated in the "Put the Jack
in Place".
Use of the jack at other points could
damage the vehicle.
Moving the jack handle up and down
to raise the ram.
OEU064040