Turn Signals And Lane Change Signals - Hyundai H350 2016 Owner's Manual

Flashing headlights
To flash the headlights, pull the lever
towards you. It will return to the nor-
mal (low-beam) position
released. The headlight switch does
not need to be on to use this flashing
feature.
Turn signals and lane change
signals
OEU044208
The ignition switch must be on for the
when
turn signals to function. To turn on
the turn signals, move the lever up or
down (A). Green arrow indicators on
the instrument panel indicate which
turn signal is operating.
They will self-cancel after a turn is
completed. If the indicator continues
to flash after a turn, manually return
the lever to the OFF position.
To signal a lane change, move the
turn signal lever slightly and hold it in
position (B). The lever will return to
the OFF position when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one
of the turn signal bulbs may be
burned out and will require replace-
ment.
One-touch lane change function
(if equipped)
To activate an one-touch lane
change function, move the turn sig-
nal lever slightly and then release it.
The lane change signals will blink 3
times.
OEU044209
NOTICE
If an indicator flash is abnormally
quick or slow, bulb may be burned
out or have a poor electrical con-
nection in the circuit.
3
3-99