Samsung S24A40 U Series User Manual page 27

2nd
3rd
Auto Source Switch
Key Repeat Time
Power LED On
Description
When there is no signal, the display automatically switches to the newly connected device.
― This function may not be supported depending on the model or geographical area.
Control the response rate of a button when the button is pressed.
Acceleration, 1 sec, or 2 sec can be selected. If
Configure the settings to enable or disable the power LED located at the lower part of the product.
• Working: The power LED is on when the product is turned on.
• Stand-by: The power LED is on when the product is turned off.
No Repeat is selected, a command responds only once when a button is pressed.
27