Table of Contents
Advertisement
Removal steps
Microprocessor
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
CAUTION:
The heat sink and microprocessor might be very hot. Before you open the computer cover, turn off the
computer and wait several minutes until the computer is cool.
Notes:
• Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.
• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept
as clean as possible.
For access, remove the following parts in order:
• "" on page
• "Front bezel" on page 57
• "Drive bay assembly" on page 59
• "Heat sink and fan assembly" on page 78
.
79
Chapter 6
Hardware removal and installation
Advertisement
Table of Contents
