– Type 2
Note: When installing the M.2 solid-state drive and the heat sink, remove the film (if any) that covers
the thermal pad.
M.2 solid-state drive bracket
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
For access, remove the following parts in order if any:
• "" on page
• "Front bezel" on page 57
• "Drive bay assembly" on page 59
• "M.2 solid-state drive and heat sink" on page 62
Removal steps
64
M75t Gen 2 Hardware Maintenance Manual