Table of Contents
Advertisement
OPERATIONS
Watching a TV Programme
DTV
ATV
To select a channel
Press [TV/DTV] to switch digital or analogue mode.
DTV
Press [P /P
(prog.)] repeatedly to select your desired
channel.
Press [the Number buttons] to enter a channel number as
three digits for quicker access.
e.g.) If you want to select the channel 24, press [0] first, then press
[2] and [4] within 3 seconds.
ATV
Press [P /P
(prog.)] repeatedly to select your desired
channel.
Press [the Number buttons] to enter a channel number as two
digits for quicker access.
e.g.) If you want to select the channel 24, press [2] and [4] within
3 seconds.
To adjust the volume
Press [
+/
– (vol.)] to adjust the audio volume.
• You can see the volume bar while adjusting the volume.
20
Volume
Press [
(mute)] to turn on or off the sound right away.
• You can recover the original volume by pressing [
again or [
+/
– (vol.)] .
Mute
Sleep Timer
DTV
ATV
You can set the unit to be turned off automatically after a set time
period.
1) Press [
(sleep) /
• Sleep timer display will appear.
2) Press [
(sleep) /
period.
• Each time you press [
by 30 minutes up to 120 minutes.
Sleep
EN
or
or
].
] repeatedly to change the sleep time
(sleep) /
], the timer increases
30min.
To cancel the sleep timer
Press [
(sleep) /
Note:
If you disconnect the unit from the AC outlet or if a
power failure occurs, the sleep timer will be cancelled.
Switching the Input Mode
DTV
You can switch the input mode to digital mode, analogue mode or
external input mode.
Press [AV] repeatedly to cycle through the input mode.
Digital channel
PC
You can also change the input mode using [BLUE].
1) Press [BLUE].
• "Select Input" menu will appear.
(mute)]
2) Press [K / L] to select the input mode you want, then press
[OK].
Note:
• To watch the digital channel, select "DTV".
• To watch the analogue channel, select "ATV".
• To use the video or S-VIDEO input jack on the unit,
select "Video".
• To use the SCART jack on the unit, select "SCART".
• To use the COMPONENT (Y/Pb/Pr) input jack on
the unit, select "Component".
• To use the HDMI-IN jack on the unit, select
"HDMI".
• To use the PC-IN (RGB) jack on the unit, select "PC".
12
] repeatedly until "Sleep Off" will appear.
Sleep
Off
ATV
Analogue channel
HDMI
Component
Select Input
1. DTV
2. ATV
3. Video
4. SCART
5. Component
6. HDMI
7. PC
Video
SCART
Advertisement
Table of Contents
