Advertisement
Before beginning the assembly of the product,make sure all parts are present.
Compare the parts with package contents list and hardware contents list.
If any parts are missing or damaged,do not attempt to assemble the product.
Tool required for assembly (included) : Allen key and Wrench.
1
Step1: attach the right side (A) and the left side (B) to
the seat (C) as shown on the picture by using the Allen
bolt (E1) and tighten with the Allen key (E5). Make sure
you don't tighten the side too tight. This you will do at
the end.
2
5
4
Step 2: put the back (D) to the bench by using the Allen screw
(E3) to fit the top of the back (D) to the side parts (B) as shown
on the picture by the Allen key (E5).At last tighten all bolts
and screws.
Advertisement
