Setting Up The Monitor; Unfolding The Double-Hinged Monitor Pedestal Base - HP L1750 User Manual

3

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.

Unfolding the Double-Hinged Monitor Pedestal Base

NOTE: The monitor is shipped with the base attached in a folded-flat position. To begin using the
monitor, you must unfold the base and place the monitor in an upright position.
1. Lift the monitor from its box and place it on a flat surface with the display head facing up.
2. Pivot the display head from portrait to landscape position (1).
Figure 3-1
3. Press down on the rear hinge (2) while gently pulling up on the monitor display head (3).
4. Raise the monitor (4) to extend the pedestal base to the desired height.
CAUTION:
uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover
to its normal condition.
Pivoting the Display Head
Do not touch the surface of the LCD panel. Pressure on the panel may cause non-
Unfolding the Double-Hinged Monitor Pedestal Base 5