Setting Up The Monitor; Installing The Monitor On The Stand - HP L1706i User Manual

3

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.

Installing the Monitor on the Stand

CAUTION:
uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its
normal condition.
1. Place the monitor panel face down on a dry, soft cloth and connect the VGA cable and power cable
to the monitor.
Figure 3-1
Do not touch the surface of the LCD panel. Pressure on the panel may cause non-
Connecting VGA and Power Cables to the Monitor
Installing the Monitor on the Stand 5