Technical Specifications - HP FS7600 User Manual

Technical Specifications

Screen Size 17" (43 cm) visual diagonal
Viewable size 16" (40.6 cm)
Anti-Glare Coating
Dot Pitch 0.25 to 0.27mm (variable)
Display Area 234 x 312 mm (typical)
Default
Display Colors Infinite
Max. Resolution 1280 Dots x 1024 Lines
Compatibility All graphic modes with horizontal
frequencies between 30 KHz to
70 KHz
Synchronization
Horizontal: 30 to 70 KHz
Vertical: 50 to 160Hz
Bandwidth 110 MHz
Input Signal Video RGB Analog Sync.
TTL Separate
Signal Cable 15-pin D-sub connector
Power Input
Voltage/ 100 to 240V
Frequency 50–60 Hz
Current Rating 1.5 A
Power 75 W (MAX.)
Consumption
Dimension 15.9 x 16.0 x 16.7 inches
(W x H x D) (maximum)
404 x 406 x 423 mm (maximum)
Weight 37.5 lbs. (maximum)
17 kg (maximum)
Operating 50°F to 95°F
Temperature 10°C to 35°C
Storage –22°F to 140°F
Temperature –30°C to 60°C
Humidity 20% to 80% (non-condensing)
Altitude Up to 10,000 ft / 3,048 meters
TCO'03 Some models meet TCO'03
MPRII Some models meet MPRII
Plug and Play Yes
* All performance specifications are provided by the component
manufacturers. Performance specifications represent the highest
specification of all HP's component manufacturers' typical level
specifications for performance and actual performance may vary
either higher or lower.
** TCO version has a different surface treatment.
*** This product is ERGONOMICS APPROVED.
11
User's Guide