Remove The Base - Philips 220P2E User Manual

2.3 Remove the Base

Condition:
• For VESA standard mounting applications
Before you start disassembling the monitor base,
please follow the instructions below to avoid
damage or injury.
1. Extend the monitor base to its maximum
height.
220P2
2. Place the monitor face down on a smooth
surface, taking care to avoid scratching or
damaging the screen. Then lift the monitor
stand.
3. While keeping the release button pressed, tilt
the base and slide it out.
Note
This monitor accepts a 100mm x 100mm VESA-
Compliant mounting interface.
8
100mm
100mm