HP D2826A User Manual page 9

To revert to the default settings for all video modes, verify that the shift
Recall Factory Settings
LED is ON, and press the recall
Adjusting the Size and Position of the Displayed Image
When making the following adjustments, verify that the shift LED is
switched OFF.
To adjust the horizontal size of the displayed image, press the
Horizontal Size
button, then use the
To adjust the horizontal position of the displayed image, press the
Horizontal Position
button, then use the
To adjust the vertical size of the displayed image, press the
Vertical Size
then use the
To adjust the vertical position of the displayed image, press the
Vertical Position
button, then use the
Adjusting the Shape of the Displayed Image
Adjustments to the shape of the displayed image are performed using a
Shift Key
second level of controls. To access this second level press the
button. This shift LED is illuminated to show that you are using the
second level controls.
To adjust the displayed image if its vertical edges do not appear parallel,
Trapezoid Correction
press the
correct the distortion.
To adjust the displayed image if its vertical edges appear to bow in or
Pincushion Correction
out, press the
adjustment controls.
and
and
and adjustment controls.
and
button, then use the
button, then reshape using the
HP 15" Color Monitor User's Guide
button.
adjustment controls.
adjustment controls.
adjustment controls.
and adjustment controls to
Using Your Monitor
button,
and
English 7