Computer Setting; Adjusting The Height And The Viewing Angle - Iiyama ProLite B2206WS-1 User Manual

COMPUTER SETTING

Signal Timing
Change to the desired signal timing listed on page 24: COMPLIANT TIMING.
Windows 95/98/2000/Me/XP/Vista Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on
Windows 95/98/2000/Me/XP/Vista by connecting the monitor to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows 95/98/2000/Me/XP: The monitor Information File for iiyama monitors
may be necessary for your computer and obtained via the Internet, using the address:
For additional information on how to download the driver for your touch screen monitor,
NOTE
please access the internet site noted above.
Monitor Drivers are not required in most cases for Macintosh or Unix operating systems.
For further information, please contact your computer dealer first for advice.

ADJUSTING THE HEIGHT AND THE VIEWING ANGLE

For optimal viewing it is recommended to position
yourself directly opposite to the full face of the
monitor, then adjust the monitor's height and angle
to your own preference.
Hold the panel so that the monitor does not topple
when you change the monitor's height or angle.
You are able to adjust the monitor's height up to
110mm, angle up to 170 degrees right and left, 20
degrees upward.
NOTE Do not touch the LCD screen when you
change the height or the angle. It may
cause damage or break the LCD screen.
Careful attention is required not to catch
your fingers or hands when you change
the height or the angle.
http://www.iiyama.com
BEFORE YOU OPERATE THE MONITOR
110mm
8