Philips 170C7 170C7F User Manual page 35

Product Information
file:///D|/EDFU/LCD/170C7/manual/english/170c7/product/product.htm (5 of 7)2006-07-28 11:03:04 AM
Pin Assignment
1. The DVI connector contains 24 signal contacts organized in three rows of eight contacts. Signal pin assignments are
listed in the following table:
Pin
Signal Assignment
No.
T.M.D.S. Data2-
1
2 T.M.D.S. Data2+
3 T.M.D.S. Data2/4 Shield
4 No connect
No connect
5
6 DDC Clock
7 DDC Data
* Analog V-sync
8
2. The 15-pin D-sub connector (male) of the signal cable:
Pin
Assignment
No.
1 Red video input
Green video input/SOG
2
3 Blue video input
4 Sense (GND)
5 Hot Plug Detect
Pin
Signal Assignment
No.
T.M.D.S. Data1-
9
10 T.M.D.S. Data1+
11 T.M.D.S. Data1/3 Shield
12 No connect
No connect
13
14 +5V Power
15 Ground (for +5V)
16 Hot Plug Detect
Pin
Assignment
No.
9 +5V
Logic ground
10
11 Ground
12 Serial data line (SDA)
13 H. Sync / H+V
Pin
Signal Assignment
No.
17 T.M.D.S. Data0-
18 T.M.D.S. Data0+
19 T.M.D.S. Data0/5 Shield
20 No connect
21 No connect
22 T.M.D.S. Clock Shield
23 T.M.D.S. Clock+
24 T.M.D.S. Clock-