LG WM1455HPA Owner's Manual page 29

us_main.book.book Page 29 Tuesday, September 14, 2021 10:30 AM
• Once the desired delay time is set, press the
Start/Pause button to start the delay time.
NOTE
• If the Start/Pause button is not pressed to begin
the delay time, the washer automatically turns
off after a certain time and all cycle settings are
lost.
Wi-Fi
When the washer is connected to a home Wi-Fi
network, the icon on the control panel is lit.
f
• To connect the washer to the LG ThinQ
application, press and hold the Delay Wash
button for 3 seconds.
Add Item
Use this function to add garments or remove
foreign objects like coins or keys after the cycle has
started.
1
Press the Add Item button while the wash
cycle is running.
• The cycle pauses and the door unlocks.
2
Open the door, add garments or remove
foreign objects, and close the door.
3
Press the Start/Pause button to resume the
cycle. The cycle continues automatically.
WARNING
• Do not attempt to force the door to open when
locked. Doing so could result in damage to the
appliance, malfunction, or personal injury.
NOTE
• If the water level and temperature are safe, the
door lock LED turns off and the door unlocks
once the wash movement has stopped.
• If the water level is too high, the door will not
unlock, and this function cannot be used.
• If the temperature in the drum is higher than
113 ℉ (45 ℃), a short warning chime sounds and
this function is not allowed for safety.
• This function is disabled during the Tub Clean
cycle.
• To preserve wash performance, wash time may
be extended depending on when garments are
added to a cycle.
• Be careful when opening the door as wet
laundry may drip or fall out.
Extra Rinse
This option adds an extra rinse to the selected
cycle. Use this option to help ensure the removal
of detergent or bleach residue from fabrics.
• Press the Extra Rinse button to add additional
rinses to the cycle.
Heavy Soil
Select this option to wash heavily soiled laundry
with more power than the standard cycle.
• Press the Heavy Soil button to select the option.
Control Lock
Use this function to disable the controls. This
function can prevent children from changing
cycles or operating this washer.
NOTE
• The function does not lock the door.
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked,
remaining time are alternately shown on the
display during the wash cycle.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking/Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the Delay Wash and Add Item
buttons at the same time for 3 seconds to
activate/deactivate this function.
• When the function is deactivated, a chime will
sound and the remaining time for the current
cycle will reappear on the display.
OPERATION 29
and the
CL