HP 2011x User Manual page 29

Icon
ENWW
Main Menu Options
Language
Information
Factory Reset
Source Control
Sub-menu Options
Bezel Power LED
Sleep Timer
Current Settings
Recommended Settings
Serial Number
FW Version
Backlight Hours
Service Support
DVI (select models)
HDMI (select models)
VGA
Using the On-Screen Display (OSD)
Description
Turns the light (LED) in the Power button
on and off. When set to off, the light will
remain off at all times.
Provides the timer-adjustment menu
options:
Set Current Time — Sets the current
●
time in hours and minutes.
Set Sleep Time — Sets the time you
●
want to place the monitor in sleep
mode.
Set On Time — Sets the time you
●
want the monitor to wake up from
sleep mode.
Timer — Sets the Sleep Timer
●
feature on or off; the default setting
is Off.
Sleep Now — Immediately sets the
●
monitor to enter sleep mode.
Selects the language in which the OSD
menu is displayed. The factory default is
English.
Selects and displays important
information about the monitor.
Provides the current input video mode.
Provides the recommended resolution
mode and refresh rate for the monitor.
Reports the serial number of the monitor.
The serial number is needed if contacting
HP technical support.
Reports the firmware version of the
monitor.
Reports the total hours of backlight
operation.
For service support, go to: www.hp.com/
support.
Returns settings to factory defaults.
Selects the video input signal. The factory
default by priority is DVI, VGA, and then
HDMI.
Selects DVI as the video input signal.
Selects HDMI as the video input signal.
Selects VGA as the video input signal.
23