Front-Panel Controls; Using The On-Screen Display (Osd) - HP 2011x User Manual

Front-Panel Controls

Control buttons (represented by icons) are located on the bottom right of the monitor.
Button
Quick View
Minus
Source
Plus
Auto Adjustment
OK
Menu
Power

Using the On-Screen Display (OSD)

Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To
access the OSD, do the following:
NOTE: The OSD is only available if there is at least one active video input selected for viewing on
the monitor.
1.
If the monitor is not already on, press the Power button to turn on the monitor.
2.
To access the OSD menu, press the Menu button. The OSD Main Menu is displayed.
3. To navigate through the Main or sub-menu, press the + (Plus) button on the front panel of the
monitor to scroll up, or the – (Minus) button to scroll in reverse. Then press the OK button to select
the highlighted function.
4. To adjust the scale of a selected item, press the + (Plus) or – (Minus) button.
5. Select Save and Return. If you do not want to save the setting, select Cancel from the sub-
menu or Exit from the Main Menu.
6.
Press the Menu button to exit the OSD.
ENWW
Icon Description
Opens the OSD Quick View menu where you can select a viewing mode which
compliments or optimizes the content you are viewing.
Navigates down through the OSD menu and decreases adjustment levels.
Chooses the video input source from the computer. Not supported on the 2011s
model.
Navigates up through the OSD menu and increases adjustment levels.
Press to automatically adjust the screen image.
NOTE:
Enters the selected option in the OSD.
Opens, selects, or exits the OSD menu.
NOTE:
remaining OSD buttons. Pressing it again for 10 seconds will re-enable
functionality.
Turns the monitor on or off. The Power button is located on the bottom-right of
the monitor.
NOTE:
Power button. Pressing it again for 10 seconds will re-enable functionality.
This item can only be used with a VGA input signal.
Pressing the Menu button for 10 seconds will disable operation of the
Pressing the Power button for 10 seconds will disable operation of the
Front-Panel Controls
19