To Change The Boot Device; To Use The Touchpad - HP Pavilion ZE4200 Startup Manual

Basic Operation
Operating Your Notebook
Press and hold the power button for at least 4 seconds until the display shuts
down. Any unsaved data will be lost. Then press the power button again to
restart.
–or, if this fails–
Insert the tip of a paper clip into the reset button on the bottom of the notebook,
and then press the power button to restart.

To change the boot device

The notebook normally boots from its internal hard disk. You can also boot the
notebook from a floppy disk drive, a CD-ROM drive, or an internal network
interface card.
1. Click Start > Turn Off Computer > Restart.
2. When the logo screen appears, press ESC to display the Boot menu.
3. Use the arrow keys to select the boot device, and press ENTER.
If you want to boot from a specific device whenever it is present, change the boot
order using the BIOS Setup utility. See "Configuring Your Notebook" in the
"Troubleshooting and Maintenance" chapter in this guide.

To use the TouchPad

The TouchPad includes an on-off button so you can turn off the TouchPad to avoid
moving the pointer accidentally, such as by touching the pad while typing. The
indicator light turns off when you turn off the TouchPad.
18 Startup Guide