GE JBS10 Series Owner's Manual page 11

Using the oven control, clock
and timer features and settings.
Throughout this manual, features and appearance may vary from your model.
Bake/Temp Recall Pad
Touch this pad to select the bake function. See the
How to Set the Oven for Baking section.
Bake Light
at this point. Glows when the oven is in bake mode.
Start Pad
Must be touched to start any cooking or cleaning
function.
Display
Shows the time of day, oven temperature and the times set for
the timer or automatic oven operations. The display will show
Pre while preheating.
If "F–" and a number or letter flash in the display and the oven
control signals, this indicates a function error code. Refer to the
Troubleshooting Tips section.
Timer On/Off Pad
Touch this pad to select the timer feature. Then
press + and – pads to adjust time.
Timer Light
point. Glows when the timer has been activated. Flashes again
when the time has run out until the control is reset.
Set Clock Pad
To set the clock, press the CLOCK
pad twice or, for models without a
CLOCK pad, hold the + and – pads for
3 seconds. See the Using the clock and
timer section.
Set Clock
Hold 3 Sec.
Automatic Oven Light
This lights anytime the oven has been
programmed using the Cooking Time
or Start Time/Delay Start functions.
Oven Light On/Off Pad
Touch this pad to turn the oven light on or off.
– Pad
Short taps to this pad will decrease the time or
temperature by small amounts. Touch and hold
the pad to decrease the time or temperature by
larger amounts.
+ Pad
Short taps to this pad will increase the time or
temperature by small amounts. Touch and hold
the pad to increase the time or temperature by
larger amounts.
Cancel/Off Pad
Touch this pad to cancel ALL oven operations
except the clock and timer.
Broil Hi/Lo Pad
Touch this pad to select the broil function. See the
How to Set the Oven for Broiling section.
Broil Light
Hi to Lo Broil at this point. Glows when the oven is
in broil mode.
GEAppliances.com
11