HP Pavilion ZD8000 Maintenance And Service Manual page 122

Removal and Replacement Procedures
7. Position the notebook with the rear panel toward you.
8. Remove the following:
1 Two HM5.0×9.0 screw locks on each side of the external
2 Five PM2.0×4.0 screws that secure the system board to the
3 Two PM2.0×8.0 screws that secure the heat sink module to
Removing the System Board Screws and Screw Locks
5–46
monitor connector
base enclosure
the base enclosure
Maintenance and Service Guide