HP Pavilion ZD8000 Maintenance And Service Manual page 115

2. Disconnect the audio/USB board cable 1 from the system
board.
3. Remove the PM2.0×6.0 screw 2 that secures the audio/USB
board to the base enclosure.
4. Remove the audio/USB board cable from the base enclosure
clips 3 through which it is routed.
5. Remove the audio/USB board 4.
Removing the Audio/USB Board
Reverse the above procedure to install the audio/USB board.
Maintenance and Service Guide
Removal and Replacement Procedures
5–39