Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hamilton Beach Commercial HMD300-UK
Summary of Contents for Hamilton Beach Commercial HMD300-UK
- Page 1 Drink Mixer Operation Manual Page 2 READ BEFORE USE. 840206801 1/12...
-
Page 2: Important Safety Instructions
Mixer Safety IMPORTANT: This operation manual should be reviewed with all equipment operators as part of your operator training program. Your safety and the safety of oth ers is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. -
Page 3: Parts And Features
Parts and Features The parts and features of your mixer are shown on this page. Be come familiar with all parts and features before using the mixer. Speed Selector Switch Mounting Bracket LOW (I)/HIGH (II) ON (I)/OFF (O) Switch Housing Container Guide Mixing Spindle Agitator... -
Page 4: Installation
Installation 1. Remove mounting bracket from the back of the 3. Place drink mixer back onto mounting bracket mixer. by inserting posts back into the appropriate holes on the back of the mixer and sliding the 2a. If mounting directly into a wall stud, drill 5/32" mixer down to lock into place. -
Page 5: Operating The Mixer
Operating the Mixer Mixing a Drink 3. Select the desired speed using the two-speed w WARNING Cut Hazard. selector switch. Do not put spoon or other utensils in container 4. Position the container into when mixing. Failure to follow these instructions the container guide and can result in cuts. - Page 6 Operating the Mixer Replacing the Agitator w WARNING Cut Hazard. To replace the agitator: 1. Disconnect power to the mixer. Disconnect power before installing or removing agitator. Failure to do so can result in serious 2. To remove the agitator, loosen injury or cuts.
- Page 7 Care and Cleaning of the Mixer Cleaning and Sanitizing the Container, Spindle, and Agitator Cleaning Sanitizing 1. Place a drop of detergent and 1 cup of water For best results, use the Hamilton Beach Universal into a mixing container. Container (#110E). 2.
-
Page 8: Motor Replacement
Care and Cleaning of the Mixer Motor Replacement Electrical Shock Hazard. 5. Carefully lower the w WARNING new motor assembly Disconnect power before servicing. Replace all into the housing, parts before operating. Failure to do so can guiding the spindle result in death or electrical shock. -
Page 9: Troubleshooting Guide
Care and Cleaning of the Mixer Troubleshooting Guide PROBLEM SOLUTION Ingredients are not being • Try selecting a different speed. mixed properly • Agitator is bent or worn (this can be prevented by not holding container in your hand or allowing agitator to hit sides of container). Replace agitators every 90 days. -
Page 10: Product Warranty
Product Warranty This Warranty supercedes all other Product Warranties LIMITED WARRANTY This warranty applies to products purchased and used in the U.S. and Canada. This is the only express warranty for this product and is in lieu of any other warranty or condition. This product is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase. - Page 11 261 Yadkin Road Southern Pines, NC 28387 840206801 www.commercial.hamiltonbeach.com 1/12...