TP-Link Deco W6000 User Manual page 6

4. Plug in and power on Deco
Power off your modem. Connect your Deco to
the modem and power them both on.
If you don't have a modem, connect the
Ethernet outlet directly to your Deco.
5. Select a location
Select a location for this Deco. If its location
is not listed, you can create a new one by
choosing Custom. This will be the name of
your Deco.
6. Set up internet connection
Select the internet connection type and enter
the information. If you are not sure, contact
your internet service provider.
4