Spacing; Reducing The Height Of Letters - Janome 5270QDC Instruction Book

q
w
e
A a j y Ё 1 2
7.0 mm

Spacing

To enter the space in monogramming, select the stitch
pattern 98, 99 or 00 in mode 5.

Reducing the height of letters

To reduce the height of character to approximately 2/3 of
its original size, select the character with the cursor key
and press "–" of the stitch width adjusting key.
A
A
2/3
q
w
68
q Pattern 98: Small-size space (2.5 mm)
w Pattern 99: Medium-size space (3.5 mm)
e Pattern 00: Large-size space (5.0 mm)
NOTE:
The stitch width of monogramming does not indicate
the actual size of character. That is an overall height
including before-edge and after-edge.
q Before-edge
w After-edge