Table of Contents
Advertisement
q
w
e
4
q
w
e
4
q
w
e
q
q
Knit Stitch
q Stitch pattern:
w Thread tension dial: 3 to 6
e Presser foot:
Place your fabric to allow a 5/8˝ (1.5 cm) seam. Trim
excess close to the stitching. Be careful not to cut the
stitches.
Double Overedge Stitch
q Stitch pattern:
w Thread tension dial: 3 to 7
e Presser foot:
This stitch is excellent for sewing fabrics that tend to fray
extensively such as linens and gabardines.
Two rows of zigzag stitches are simultaneously sewn
over the edge to insure that your seams will not ravel.
Sew while guiding the fabric edges along the guide on
the foot.
q Guide
CAUTION:
When using an overedge foot, make sure to set the
stitch width at 5.0-7.0, otherwise the needle may hit
the wires on the foot.
Overlock Stitch
q Stitch pattern:
w Thread tension dial: 6 to 8
e Presser foot:
NOTE:
The identification letter for the recommended foot will
not be displayed on the LCD when the overlock stitch
pattern is selected. To sew the overlock stitch pattern,
attach the overcast foot M.
This stitch finishes the edges of fabric in a way similar
to a commercial overlocking machine for a professional
look.
Place the fabric edge next to the guide of the foot and
sew.
q Guide
34
MODE 2:
13
Zigzag foot A
MODE 2:
14
Overedge foot C
MODE 2:
15
Overcast foot M
- Quick Links:
- Monogramming
- Stitch Chart
Hide quick links:
Advertisement
Table of Contents
