Related Manuals for Walker Edison AF4DRISA
Summary of Contents for Walker Edison AF4DRISA
- Page 1 AF4DRISA Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 29/10/2020(C) Walker Edison ® © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved.
-
Page 2: General Assembly Guidelines
Concealed hinges are three-way adjustable. Horizontal In-and-Out Vertical by screw adjustment by loosening the hinge-arm Via slots in the mounting mounting screw or via cam plate or via cam adjustment adjustment © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. -
Page 3: Parts List
Parts List © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. -
Page 4: Hardware List
Screw Hex key Ø6x12mm Bolt Ø6x25mm Bolt Europe hinge Handle Ø6x32mm Cam bolt Ø3x8mm Bolt Ø4x14mm Screw Glass pad Ø4x38mm Screw Bouncer Ø4x12mm Screw Ø4x25mm Screw Plastic strap © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. - Page 5 Ø3x12mm Screw Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 6 Disassembly: Holding the bottom bracket and then push out bouncer from one side to other side, Assembly: Make sure the top of bouncer is aligned with the top of bottom bracket then press down bouncer to bottom bracket as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 7 Bouncer (B) to parts (1,7) with Philips head screwdriver as per diagram. Note: Please disassembly the Bouncer (S) follow up the step 1 as per diagram firstly before secure screw . © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 8 Step 3 Insert wooden dowel (A) into parts (2,4,5,6), and secure cam bolt (B) into parts (2,4) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 9 Insert wooden dowel (A) into parts (3,8), and secure cam bolt (B) into part (3) and cam bolt (M) into part (11) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 10 Pick up the slider arm (Y) and separate the slide runner for the following Steps. Extend the slide runner all the way forward,press the plastic release lever of the slider arm up and pull the slide runner complete out . © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.10...
- Page 11 Step 6 Using screw (F) attach drawer slider (Y) to parts (14,16) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.11...
- Page 12 Step 7 Using screw (F) attach drawer slider (Y) to parts (3,4) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.12...
- Page 13 Step 8 Using bolt (H) attach part (27) to part (10) with Hex key (G) as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.13...
- Page 14 Step 9 Using bolt (J) attach part (9) to parts (25,26,28) with Hex key (G) as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.14...
- Page 15 Step 10 Using bolt (J) attach part (10) to part (26) with Hex key (G) as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.15...
- Page 16 Step 11 Using bolt (H) attach parts (9,10) to part (24) with Hex key (G) as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.16...
- Page 17 Step 12 Using Cam lock(C) secure part (7) to part (3) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.17...
- Page 18 Step 13 Attach part (5) into part (6) as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.18...
- Page 19 Step 14 Using Cam lock(C) secure part (2) to part (5) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.19...
- Page 20 Step 15 Using Cam lock(C) secure part (7) to part (2) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.20...
- Page 21 Step 16 Using Cam lock(C) secure part (8) to part (3) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.21...
- Page 22 Step 17 Using Cam lock(C) secure part (4) to parts (6,8) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.22...
- Page 23 Step 18 Using Cam lock(C) secure part (1) to parts (2,3,4,5,6) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.23...
- Page 24 Step 19 Using screw (E) attach part (19) to parts (2,3,4,5,6) with Hex key (G) as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.24...
- Page 25 Step 20 Using bolt (H) attach part (20) to part (19) with Hex key (G) as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.25...
- Page 26 Step 21 Using bolt (H) attach parts (25,28) to part (2) with Hex key (G) as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.26...
- Page 27 Step 22 Attach part (11) to part (3) as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.27...
- Page 28 Step 23 Using bolt (J) attach part (11) to part (26), then using bolt (H) attach part (27) to part (11) with Hex key (G) as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.28...
- Page 29 Using bolt (H) attach part (11) to part (24)with Hex key (G), then using cam lock (C) secure part (11) to part (3) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.29...
- Page 30 Step 25 Using screw (E) attach parts (10,27) to parts (5,19) with Hex key (G) as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.30...
- Page 31 Using bolt (N) attach flat washer (P) to parts (12,13), then using screw (AA) attach Europe Hinge (K) into parts (12,13) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.31...
- Page 32 Step 27 Using screw (AA) attach Europe Hinge (K) into part (2) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.32...
- Page 33 Step 28 Open Close Open and close by pushing as per diagram, don't need pulls any more. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.33...
- Page 34 Step 29 Insert the glass pad (Q) on the top of parts (24,25,26,28) as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.34...
- Page 35 Step 30 Place the parts (21,22,23) carefully as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.35...
- Page 36 Secure cam bolt (B) into part (18), and use screw (F) attach handle (L) to part (18) , then using screw (R) attach parts (14,16) to part (17) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.36...
- Page 37 Step 32 Using Cam lock(C) secure part (18) to parts (14,16) with Philips head screwdriver , then place part (15) as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.37...
- Page 38 Step 33 Place sticker (D) cover the holes as per diagram . © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.38...
- Page 39 . © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.39...
- Page 40 Step 35 Using screw (T) attach Velcro strap (V) into part (1) with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.40...
- Page 41 Wall Using screw (U) attach Velcro strap (V) into Nut (W) to wall with Philips head screwdriver as per diagram. © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.41...
-
Page 42: Final Assembly
Step 37 Final Assembly © Copyright 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.42...