2.2 Detailed Assembly Procedure
②
①
Fig.1
⑤
Positioning Pin
Fig.2
⑨
⑧
⑦
⑥
④
Mounting Port
③
Fig.3
2.2.1 Mounting binocular viewing head
(Fig.1、Fig.2)
1. Rotate the objective① into the objective mount
thread on the lower end of the zoom body. ② , as ③
in fig.2.
2. Aligning the positioning pin of the zoom body③ to
the positioning groove on the binocular viewing head
④, insert the dovetail mount at the bottom of the
viewing head into the mounting port on the zoom body
③, and tighten the viewing head clamping screw⑤
with provided hexagonal driver.
Note:
Working Environment Requirement:
1.Ambient temperature: 5°C to 40°C
. (41°F to 104°F),Maximum R.H:85%。
2. High Temperature will result in a mildewing,
dew and even ruinous instrument.
3.Avoid placing the instrument in a dusty
environment. When ending your microscope
operation, please cover it with the dust cover.
4.Lay the microscope in a plan and stable
position, please.
6